ALZ 3740

$449
Precision submersible pressure transmitter for viscous media

Features

Ranges: 0.4 mH2O up to 100 mH2O
Basic accuracy: ±0.25%
Sensor: high precision ceramic capacitive
Probe: Ø40 mm, AISI 316L
Output signal: 4...20 mA; RS-485/Modbus RTU;
Media temperatures: -20…+70 °C
Optional: Ex ia, HART, Pt100 temperature sensor

Description

ALZ 3740 is based on a high precision capacitive ceramic oil free sensor with ranges starting at 40 mbar for measuring liquid levels as low as 40 cm. High overload capacity of the sensor, flush ceramic diaphragm and stainless steel housing make APZ 3740 a transmitter of choice for the viscous and abrasive media. For even better compatibility with aggressive media please refer to the similar model APZ 3742 with the plastic housing.

Code configurator

Order code:

  • Dry air junction box for submersible transmitters
    Port 1: cable gland, for vented transmitter cable Ø6...10 mm
    Port 2: cable gland, for equipment cable Ø6...10 mm
    Air venting: membrane air vent valve
    Housing: aluminum
    Features: 10kV surge protection
    Optional: Pt100 transmitter
  • Anchoring clamp for submersible transmitter
    Cable diameter: 5.5-10.5 mm
    Materials: stainless steel housing, PA jaws
    Bearing capacity: 250 kg
Implementation
3D model file
See Also
  • $349
    Precision submersible pressure transmitter for aggressive media
    Ranges: 0.4 mH2O up to 100 mH2O
    Basic accuracy: ±0.25%
    Sensor: high precision ceramic capacitive
    Probe: Ø40 mm, plastic
    Optional: Pt100
  • $399
    Precision submersible pressure transmitter with detachable probe
    Ranges: 1 mH2O up to 250 mH2O
    Basic accuracy: ±0.1%
    Probe: Ø27 mm
    Optional: Ex ia, HART, Modbus, Pt100
  • $99
    Dry air junction box for submersible transmitters
    Port 1: cable gland, for vented transmitter cable Ø6...10 mm
    Port 2: cable gland, for equipment cable Ø6...10 mm
    Air venting: membrane air vent valve
    Housing: aluminum
    Features: 10kV surge protection
    Optional: Pt100 transmitter
  • $49
    Anchoring clamp for submersible transmitter
    Cable diameter: 5.5-10.5 mm
    Materials: stainless steel housing, PA jaws
    Bearing capacity: 250 kg

Products

Company

Special Economic Zone Technopolis Moscow

42-5, Volgogradsky prospect, Floor 1, Premise I
Moscow, 109316, Russia

+7 (495) 796-92-20

ISO 9001:2015 CERTIFIED

“ New products development, constant improvements, qualified service and technical support are our priorities ”